Mechanical parts
Wheeled Trapezium Canopy Dustbin
- Bounding box
- 500.0 × 258.0 × 668.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Make me a dustbin with the height of 40cm, width of 25cm, and lenght of 50cm in the main body. For the cap / canopy it will be a trapexium with the front side hinged making it openable. The lenght of the hinge's cap is 22cms tall and 47cm long. The dustbin contains wheels on the bottom
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 500 mm | 250 – 1200 |
| Body Width | 250 mm | 120 – 800 |
| Body Height | 400 mm | 150 – 1000 |
| Wall Thickness | 3 mm | 1 – 10 |
| Canopy Length | 470 mm | 200 – 1200 |
| Canopy Width | 250 mm | 100 – 800 |
| Canopy Front Height | 220 mm | 60 – 600 |
| Canopy Back Height | 60 mm | 20 – 400 |
| Hinge Barrel Dia | 16 mm | 6 – 40 |
| Hinge Leaf Height | 50 mm | 15 – 150 |
| Hinge Leaf Thickness | 5 mm | 2 – 12 |
| Wheel Diameter | 50 mm | 20 – 150 |
| Wheel Width | 25 mm | 8 – 80 |
| Wheel Offset X | 210 mm | 0 – 600 |
| Wheel Offset Y | 90 mm | 0 – 400 |
| Caster Mount Length | 46 mm | 15 – 120 |
| Caster Mount Width | 40 mm | 15 – 120 |
| Caster Mount Thickness | 8 mm | 3 – 30 |
| Caster Fork Thickness | 4 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.