Mechanical parts
Wheelchair Mounting Base Assembly (No Fastener Hardware)
- Bounding box
- 400.0 × 300.0 × 390.7 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
I WANT YOU TO GIVE ME EACH PART SEPERATLY AND I DONT WANT THRE BOLTS AND NUTS
Parameters
| Name | Value | Range |
|---|---|---|
| Support rod lateral spacing | 200 mm | 100 – 360 |
| Mounting adapter lateral spacing | 200 mm | 100 – 360 |
| C-clamp lateral spacing | 200 mm | 100 – 360 |
| Base plate length | 400 mm | 300 – 600 |
| Base plate width | 300 mm | 200 – 500 |
| Base plate thickness | 10 mm | 5 – 20 |
| Base plate corner radius | 5 mm | 1 – 8 |
| Adapter/fastener hole diameter | 6 mm | 3 – 12 |
| Adapter length | 60 mm | 40 – 100 |
| Adapter width | 50 mm | 30 – 80 |
| Adapter thickness | 10 mm | 5 – 20 |
| Support rod diameter | 30 mm | 20 – 50 |
| Support rod length | 400 mm | 250 – 600 |
| Support rod angle | 30 deg | 15 – 60 |
| Hook tube diameter | 25.4 mm | 20 – 35 |
| Hook radial clearance | 1 mm | 0.2 – 3 |
| Hook radial thickness | 8 mm | 4 – 15 |
| Hook width | 30 mm | 15 – 60 |
| Clamp mounting hole spacing | 24 mm | 15 – 50 |
| C-clamp hole diameter | 5 mm | 3 – 8 |
| C-clamp overall height | 111 mm | 80 – 150 |
| C-clamp base X | 47 mm | 30 – 80 |
| C-clamp base Y | 42 mm | 30 – 70 |
| C-clamp side plate width | 31 mm | 20 – 50 |
| C-clamp side plate height | 61 mm | 40 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
