Mechanical parts
Wera ESD Screwdriver Two-Tier Organizer
- Bounding box
- 245 × 47 × 47.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create two rows, where one is higehr than the other one. The shaft of each srewdriver is 40mm long. Make the whole a little bit deeper. The shaft has a diameter of 2mm. Extend this a little bit as well and add a chamfer to center the screwdriver automatically. The handle of the screwdrivers is 1.3 cm thick (diameter) at the end of the shaft. The spacing between each hole need to account for this
Parameters
| Name | Value | Range |
|---|---|---|
| Handle diameter at shaft end | 13 mm | 8 – 40 |
| Shaft diameter | 2 mm | 1 – 8 |
| Clearance added to the shaft hole | 0.6 mm | 0.2 – 2 |
| Shaft hole depth | 26 mm | 8 – 40 |
| Self-centring funnel chamfer | 2.5 mm | 0.5 – 5 |
| Free space between handles | 3 mm | 1 – 10 |
| Holes per row (15 x 2 = 30) | 15 mm | 2 – 20 |
| Rows, rear row sits higher | 2 mm | 1 – 4 |
| Hole spacing along a row | 16 mm | 10 – 60 |
| Extra depth between the rows | 10 mm | 0 – 30 |
| Wall around edge holes | 4 mm | 1.5 – 15 |
| Floor thickness under holes | 3.5 mm | 1.2 – 10 |
| Height difference between the rows | 18 mm | 4 – 60 |
| Corner radius | 3 mm | 0.5 – 20 |
| Top edge chamfer | 2 mm | 0.5 – 6 |
| Bottom edge chamfer | 0.8 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.