Mechanical parts
Walker Frame w/ Harness, Toy Bar & Bolted Frame-Arm Joint
- Bounding box
- 470.0 × 530.0 × 415.1 mm
- Engine
- Precision B-rep
- Parameters
- 61
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
A FRAME ARM JOINT M5 × 20 SHCS TORQUE = 4 N·m APPLY MEDIUM THREADLOCKER
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Width | 300 mm | 150 – 600 |
| Frame Depth | 400 mm | 200 – 800 |
| Tube Diameter | 20 mm | 10 – 40 |
| Bracket Width | 80 mm | 40 – 160 |
| Bracket Depth | 40 mm | 20 – 120 |
| Bracket Thickness | 8 mm | 3 – 20 |
| Pivot Pin Diameter | 8 mm | 3 – 16 |
| Pivot Pin Length | 20 mm | 8 – 50 |
| Pad Thickness | 10 mm | 3 – 30 |
| Harness Width | 260 mm | 120 – 420 |
| Harness Depth | 380 mm | 180 – 600 |
| Strap Width | 40 mm | 15 – 90 |
| Harness Height | 200 mm | 80 – 400 |
| Slider Length | 120 mm | 50 – 250 |
| Slider Width | 40 mm | 15 – 100 |
| Slider Height | 20 mm | 8 – 60 |
| Lock Pin Diameter | 6 mm | 2 – 14 |
| Lock Pin Length | 30 mm | 10 – 80 |
| Spring Diameter | 10 mm | 4 – 25 |
| Spring Length | 60 mm | 20 – 150 |
| Toy Bar Height | 260 mm | 100 – 500 |
| Toy Bar Tube Dia | 16 mm | 8 – 35 |
| Toy Bar Width | 220 mm | 100 – 450 |
| Sun Toy Diameter | 60 mm | 20 – 150 |
| Ring Outer Dia | 70 mm | 30 – 160 |
| Ring Inner Dia | 50 mm | 15 – 130 |
| Electronics Width | 60 mm | 20 – 150 |
| Electronics Height | 40 mm | 15 – 120 |
| Electronics Depth | 30 mm | 10 – 100 |
| Wheel Diameter | 120 mm | 40 – 250 |
| Wheel Width | 25 mm | 8 – 70 |
| Axle Diameter | 8 mm | 3 – 20 |
| Axle Length | 60 mm | 20 – 150 |
| LED Module Dia | 60 mm | 20 – 140 |
| LED Module Thickness | 6 mm | 2 – 25 |
| Board Height | 260 mm | 100 – 600 |
| Mast Diameter | 20 mm | 8 – 50 |
| Panel Width | 200 mm | 80 – 400 |
| Panel Depth | 60 mm | 20 – 200 |
| Panel Thickness | 8 mm | 3 – 25 |
| Panel Gap | 30 mm | 5 – 120 |
| Base Margin | 20 mm | 5 – 60 |
| Base Thickness | 12 mm | 4 – 35 |
| Node Columns | 3 | 1 – 8 |
| Node Rows | 4 | 1 – 10 |
| Node Size | 20 mm | 6 – 60 |
| Node Height | 6 mm | 2 – 25 |
| Node Margin | 30 mm | 5 – 80 |
| Rib Width | 6 mm | 2 – 25 |
| Rib Height | 3 mm | 1 – 15 |
| Clamp Block Length (X) | 34 mm | 30 – 60 |
| Clamp Block Width (Y) | 34 mm | 20 – 70 |
| Clamp Block Height (Z) | 34 mm | 20 – 70 |
| Clamp Edge Radius | 3 mm | 0 – 8 |
| Screw Diameter (M5) | 5 mm | 3 – 10 |
| Screw Length (20) | 20 mm | 10 – 30 |
| SHCS Head Diameter | 8.5 mm | 4 – 20 |
| SHCS Head Height | 5 mm | 2 – 12 |
| Hex Socket A/F | 4 mm | 1.5 – 10 |
| Hex Socket Depth | 2.5 mm | 1 – 6 |
| Bolt Clearance | 0.4 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.