Mechanical parts
Vulp Pro Butterfly Knife Assembled
- Bounding box
- 210 × 27.2 × 13 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
Nabalis X Will Hirsch Vulp Pro Butterfly Knife Make it workable and assemble it with separate handles and blades and screws that connect the whole thing
Parameters
| Name | Value | Range |
|---|---|---|
| Blade length | 105 mm | 80 – 150 |
| Blade width | 22 mm | 15 – 40 |
| Blade thickness | 3 mm | 1 – 6 |
| Tang length behind pivot | 20 mm | 10 – 30 |
| Handle length | 125 mm | 90 – 160 |
| Handle height | 13 mm | 8 – 25 |
| Handle side thickness | 5 mm | 3 – 12 |
| Handle edge rounding | 2 mm | 0.5 – 5 |
| Pivot screw diameter | 6 mm | 3 – 10 |
| Pivot screw head diameter | 9 mm | 5 – 14 |
| Pivot screw head height | 2 mm | 0.6 – 4 |
| Body screw diameter | 3 mm | 2 – 5 |
| Body screw length | 8 mm | 4 – 15 |
| Body screw head diameter | 5.5 mm | 3 – 9 |
| Body screw head height | 1.5 mm | 0.4 – 4 |
| Washer outer diameter | 10 mm | 6 – 16 |
| Washer inner diameter | 6.2 mm | 3 – 10 |
| Washer thickness | 0.5 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.