Brackets and mounts
Universal Drill Battery Dock
- Bounding box
- 90 × 70 × 18 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
To design or download 3D files for battery mounts (adapters or holders) for common power drills, you need to identify the most widely used battery interface standard, known as the "universal" battery interface.
Parameters
| Name | Value | Range |
|---|---|---|
| Length along the slide direction | 90 mm | 60 – 140 |
| Width across the rails | 70 mm | 50 – 110 |
| Base plate thickness | 6 mm | 4 – 10 |
| Base plate corner radius | 6 mm | 1 – 15 |
| Distance between rail centrelines | 44 mm | 28 – 80 |
| Rail height above the plate | 5.5 mm | 3 – 12 |
| Rail width at its base | 4.5 mm | 3 – 10 |
| Rail width at its top (dovetail) | 7 mm | 3.5 – 14 |
| Back stop height above the plate | 12 mm | 4 – 30 |
| Back stop thickness | 5 mm | 3 – 12 |
| Battery latch relief pocket width | 12 mm | 6 – 30 |
| Mounting screw clearance diameter | 4.5 mm | 3 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and