Enclosures and housings
UAV Fuselage
- Bounding box
- 81.6 × 97.6 × 652.6 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a symmetric UAV fuselage solid in mm. Length exactly 650 mm. Maximum width MUST NOT exceed 72 mm. Maximum height MUST NOT exceed 88 mm. Elliptical sections: X0 = 28x28 X80 = 58x70 X140 = 68x82 X220 = 72x88 X350 = 58x70 X500 = 32x40 X650 = 18x22 Loft smoothly through these sections. Do not overshoot section dimensions. Do not bulge outside the maximum 72 mm width or 88 mm height. Keep all cross-sections centered and symmetric. Create one closed solid suitable for STEP export.
Parameters
| Name | Value | Range |
|---|---|---|
| Nose Fillet Radius | 5 mm | 0 – 20 |
| Station 1 X | 0 mm | 0 – 650 |
| Station 2 X | 80 mm | 0 – 650 |
| Station 3 X | 140 mm | 0 – 650 |
| Station 4 X | 220 mm | 0 – 650 |
| Station 5 X | 350 mm | 0 – 650 |
| Station 6 X | 500 mm | 0 – 650 |
| Station 7 X | 650 mm | 0 – 650 |
| Station 1 Width | 28 mm | 1 – 150 |
| Station 1 Height | 28 mm | 1 – 150 |
| Station 2 Width | 58 mm | 1 – 150 |
| Station 2 Height | 70 mm | 1 – 150 |
| Station 3 Width | 68 mm | 1 – 150 |
| Station 3 Height | 82 mm | 1 – 150 |
| Station 4 Width | 72 mm | 1 – 150 |
| Station 4 Height | 88 mm | 1 – 150 |
| Station 5 Width | 58 mm | 1 – 150 |
| Station 5 Height | 70 mm | 1 – 150 |
| Station 6 Width | 32 mm | 1 – 150 |
| Station 6 Height | 40 mm | 1 – 150 |
| Station 7 Width | 18 mm | 1 – 150 |
| Station 7 Height | 22 mm | 1 – 150 |
| Hatch X | 180 mm | 0 – 500 |
| Hatch Length | 180 mm | 10 – 300 |
| Hatch Width | 58 mm | 10 – 100 |
| Hatch Depth | 5 mm | 1 – 20 |
| Battery X | 220 mm | 0 – 400 |
| Battery Y | 0 mm | -50 – 50 |
| Battery Z | 0 mm | -50 – 50 |
| Battery Length | 115 mm | 20 – 200 |
| Battery Width | 40 mm | 10 – 80 |
| Battery Height | 38 mm | 10 – 80 |
| FC X | 300 mm | 0 – 500 |
| FC Y | 0 mm | -40 – 40 |
| FC Z | 0 mm | -40 – 40 |
| FC Length | 110 mm | 10 – 150 |
| FC Width | 70 mm | 10 – 100 |
| FC Height | 30 mm | 5 – 60 |
| Wing Seat X | 220 mm | 0 – 400 |
| Wing Seat Z | 0 mm | -40 – 40 |
| Wing Seat Chord | 240 mm | 50 – 400 |
| Wing Seat Depth | 30 mm | 5 – 60 |
| Wing Seat Height | 20 mm | 5 – 40 |
| Boom Tube OD | 10 mm | 2 – 20 |
| Front Boom X | 80 mm | 0 – 400 |
| Front Boom Z | 0 mm | -50 – 50 |
| Rear Boom X | 500 mm | 200 – 650 |
| Rear Boom Z | 0 mm | -50 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox