Enclosures and housings
T-Slot Aluminum Frame Table
- Bounding box
- 1101 × 601 × 800 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a three-level structural table frame using standard 30mm square T-slot aluminum extrusions. Total frame width is 1100mm, total frame depth is 600mm, and the height of the legs is 800mm. Place horizontal structural frames at Z=100mm, Z=380mm, and Z=770mm. Add a vertical middle support pillar at X=550mm to reinforce the span. Combine all parts into a clean solid assembly
Parameters
| Name | Value | Range |
|---|---|---|
| Overall frame width, X | 1100 mm | 400 – 2000 |
| Overall frame depth, Y | 600 mm | 300 – 1500 |
| Leg height, Z | 800 mm | 200 – 1500 |
| Square extrusion profile size | 30 mm | 20 – 60 |
| Slot opening width | 6 mm | 3 – 10 |
| Total slot depth | 8.5 mm | 4 – 12 |
| Inner "T" channel width | 11 mm | 5 – 18 |
| Profile corner radius | 1.5 mm | 0 – 5 |
| Lower frame centre height | 100 mm | 40 – 400 |
| Middle frame centre height | 380 mm | 150 – 700 |
| Top frame centre height | 770 mm | 400 – 1200 |
| Cross rails carrying the centre pillar | 1 | 0 – 1 |
| Interference where parts butt together | 1 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,