3D preview of Soccer Ball and Thermoforming Mold Set
Loading the interactive model…
Interactive 3D model of Soccer Ball and Thermoforming Mold Set

Enclosures and housings

Soccer Ball and Thermoforming Mold Set

1 views
Bounding box
370.0 × 120 × 80.0 mm
Engine
3D Printing B-rep
Parameters
24
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Create a three-part CAD assembly arranged in a horizontal row along the X-axis on the XY plane (Z=0), separated by 25 mm gaps between their bounding boxes. Part 1 (on the left, centered at X=-140, Y=0): A solid spherical soccer ball with an outer diameter of 80 mm resting its bottom pole on Z=0, featuring a classic truncated icosahedron pattern of 12 regular pentagons and 20 regular hexagons across the entire spherical surface, separated by 1.5 mm wide and 1.2 mm deep recessed grooves. Part 2 (in the center, centered at X=0, Y=0): A positive thermoforming male mold punch starting with a 120 mm by 120 mm square base plate of 5 mm thickness and 8 mm corner fillets resting on Z=0; centered on its top face, extrude a smooth hemispherical dome boss of 81 mm diameter and 40.5 mm height with a 2-degree draft at the base, and add four vertical cylindrical alignment pins (6 mm diameter, 15 mm height, 1 mm top chamfer) at local coordinates (±48 mm, ±48 mm) from the plate center. Part 3 (on the right, centered at X=150, Y=0): A negative thermoforming female mold cavity block measuring 120 mm by 120 mm in width and length and 48 mm in height with 8 mm corner fillets resting on Z=0; cut a centered smooth hemispherical dome cavity into its bottom face (Z=0) with an 83 mm diameter, 41.5 mm depth, and a 3 mm entry fillet, and cut four vertical blind alignment holes (6.4 mm diameter, 17 mm depth) into the bottom face at local coordinates (±48 mm, ±48 mm) from the block center.

Parameters

NameValueRange
Gap between parts25 mm5 – 100
Soccer ball center X-140 mm-200 – 200
Outer diameter80 mm40 – 120
Groove width1.5 mm0.6 – 3
Groove depth1.2 mm0.4 – 2
Base plate width120 mm60 – 200
Base plate thickness5 mm2 – 20
Corner fillet radius8 mm0 – 20
Dome boss diameter81 mm20 – 150
Dome boss height40.5 mm5 – 100
Base draft angle2 deg0 – 10
Alignment pin diameter6 mm3 – 12
Alignment pin height15 mm5 – 40
Pin top chamfer1 mm0 – 3
Pin position from center48 mm10 – 60
Cavity block width120 mm60 – 200
Cavity block height48 mm20 – 100
Corner fillet radius8 mm0 – 20
Cavity diameter83 mm20 – 150
Cavity depth41.5 mm5 – 100
Cavity entry fillet3 mm0.5 – 8
Alignment hole diameter6.4 mm3 – 12
Alignment hole depth17 mm5 – 40
Hole position from center48 mm10 – 60

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Oval Safety Snap Carabiner46.5 × 12.0 × 80.0 mmPrecision

Oval Safety Snap Carabiner

Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.

STEPSTLGLB7 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
Soccer Ball and Thermoforming Mold Set - Free CAD Model (STEP, STL) | TextoCAD