Brackets and mounts
U-Shaped Snap-Fit Clip with Guide Channel
- Bounding box
- 40 × 44.6 × 9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple parametric 3D-printable U-shaped snap-fit clip. Dimensions: - Length: 40mm - Internal width: 40.6mm - Side walls: 2mm thick - Side wall height: 9mm - Bottom inward retaining lips: 2mm The clip must push over a flat 40mm thick wooden door edge. Leave the centre underneath open. Add two parallel longitudinal guide ribs underneath, 8mm apart, forming an open-bottom guide channel for a separate floor-mounted alignment fin. Use simple solid geometry. No decorative features. All dimensions in mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length along door edge | 40 mm | 20 – 200 |
| Internal width over door edge | 40.6 mm | 10 – 100 |
| Side wall thickness | 2 mm | 0.8 – 6 |
| Side wall height | 9 mm | 3 – 50 |
| Retaining lip inward depth | 2 mm | 1 – 10 |
| Guide rib centre spacing | 8 mm | 4 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and