Brackets and mounts
U-Shaped Snap-Fit Clip with External Guide Channel
- Bounding box
- 40 × 44.6 × 13 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the U-shaped door clip design. IMPORTANT: The wooden door must fit inside a completely smooth U-shaped cavity. There must be NO groove, slot, channel or guide ribs inside the clip where the wooden door sits. The guide channel must be on the EXTERNAL UNDERSIDE of the clip, facing the floor. Create two parallel downward-projecting rails on the outside bottom surface. These rails must form an 8mm wide open-bottom channel between them. The separate stationary floor-mounted guide fin will enter this channel and travel along it as the door slides. Keep the internal door-gripping surfaces flat and smooth. Maintain a 40.6mm internal width for the nominal 40mm door. The guide channel must run continuously along the door length when the modular sections are assembled.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length along door edge | 40 mm | 20 – 200 |
| Internal width over door edge | 40.6 mm | 10 – 100 |
| Side wall thickness | 2 mm | 0.8 – 6 |
| Side wall height | 9 mm | 3 – 50 |
| Retaining lip inward depth | 2 mm | 1 – 10 |
| External guide channel width | 8 mm | 4 – 50 |
| Guide rail downward projection | 4 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and