Jigs and fixtures
Two-Tier Waterfall Planter
- Bounding box
- 160 × 160 × 155 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
there is rod between them which is why it standing properly and there is particular area where the water fall is happening so that it doesn't get contact with plant and soil
Parameters
| Name | Value | Range |
|---|---|---|
| Reservoir outside diameter | 160 mm | 80 – 260 |
| Reservoir height | 60 mm | 30 – 150 |
| Reservoir wall thickness | 3.5 mm | 1.6 – 8 |
| Reservoir floor thickness | 4 mm | 2 – 12 |
| Central rod boss diameter | 28 mm | 16 – 60 |
| Rod boss height above the floor | 30 mm | 10 – 80 |
| Pot outside diameter | 120 mm | 60 – 220 |
| Pot height | 55 mm | 25 – 140 |
| Pot wall thickness | 3.5 mm | 1.6 – 8 |
| Pot floor thickness | 4 mm | 2 – 12 |
| Support rod diameter | 8 mm | 4 – 20 |
| Clear gap between reservoir and pot | 66 mm | 20 – 250 |
| Rod insertion depth at each end | 12 mm | 5 – 30 |
| Water channel radial width | 9 mm | 4 – 25 |
| Channel angular span | 110 deg | 40 – 170 |
| Spillway sill below the pot rim | 15 mm | 4 – 40 |
| Spout reach beyond the pot wall | 12 mm | 4 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
