Mechanical parts
Two-Part Sensor Enclosure with Snap Pegs
- Bounding box
- 186.0 × 60.0 × 28.0 mm
- Engine
- Precision B-rep
- Parameters
- 63
- Published
- October 8, 2026
Download
Free to download and use. See the terms.
The prompt
make it two separete part and get ride of that weird screws
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length (X) | 90 mm | 40 – 200 |
| Outer Width (Y) | 60 mm | 30 – 150 |
| Housing Height (Z) | 28 mm | 10 – 80 |
| Wall Thickness | 2.5 mm | 1.2 – 6 |
| Floor Thickness | 2.5 mm | 1.2 – 6 |
| Outside Corner Fillet | 4 mm | 0 – 12 |
| Cover Thickness | 3 mm | 1.5 – 8 |
| Print Clearance | 0.2 mm | 0 – 0.6 |
| Snap Peg Shaft Diameter | 3.3 mm | 1.5 – 8 |
| Peg Insertion Depth | 10 mm | 3 – 30 |
| Peg Shoulder Diameter | 5.6 mm | 2 – 14 |
| Peg Shoulder Height | 1.6 mm | 0.6 – 5 |
| Corner Boss Diameter | 9 mm | 5 – 20 |
| Boss Inset from Side Wall | 7 mm | 3 – 25 |
| Boss Inset from End Wall | 7 mm | 3 – 25 |
| Socket Depth Below Shoulder | 9 mm | 2 – 30 |
| PCB Post Diameter | 6 mm | 3 – 12 |
| PCB Post Height | 5 mm | 2 – 20 |
| PCB Post Pilot Hole Dia | 2.2 mm | 1 – 6 |
| PCB Post Pilot Hole Depth | 4 mm | 1 – 15 |
| Post Inset from Board Edge | 3 mm | 1.5 – 10 |
| ESP32 Board Length | 55 mm | 20 – 90 |
| ESP32 Board Width | 28 mm | 12 – 50 |
| ESP32 Centre X | -14 mm | -60 – 60 |
| ESP32 Centre Y | 4 mm | -40 – 40 |
| SD Module Length | 24 mm | 10 – 60 |
| SD Module Width | 20 mm | 8 – 45 |
| SD Module Centre X | 22 mm | -60 – 60 |
| SD Module Centre Y | 14 mm | -40 – 40 |
| RTD Module Length | 24 mm | 10 – 60 |
| RTD Module Width | 20 mm | 8 – 45 |
| RTD Module Centre X | 22 mm | -60 – 60 |
| RTD Module Centre Y | -14 mm | -40 – 40 |
| USB Slot Width | 12 mm | 4 – 30 |
| USB Slot Height | 6 mm | 2 – 20 |
| USB Slot Centre Height | 8 mm | 2 – 60 |
| microSD Slot Width | 12 mm | 4 – 30 |
| microSD Slot Height | 5 mm | 2 – 15 |
| microSD Slot Centre Height | 10 mm | 2 – 60 |
| PT100 Cable Hole Dia | 6 mm | 2 – 20 |
| Cable Hole Centre Height | 8 mm | 2 – 60 |
| OLED Recess Width (X) | 34 mm | 10 – 80 |
| OLED Recess Depth (Y) | 22 mm | 8 – 60 |
| OLED Recess Depth (Z) | 1.8 mm | 0.5 – 6 |
| OLED Window Width | 26 mm | 8 – 70 |
| OLED Window Height | 15 mm | 5 – 50 |
| OLED Centre X | -15 mm | -80 – 80 |
| OLED Centre Y | 0 mm | -50 – 50 |
| Display Clip Thickness | 1.2 mm | 0.4 – 3 |
| Display Clip Overhang | 1 mm | 0.4 – 4 |
| Display Clip Width | 12 mm | 3 – 30 |
| Display Clip Count | 4 pcs | 2 – 4 |
| Encoder Shaft Hole Dia | 7.2 mm | 3 – 20 |
| Encoder Centre X | 26 mm | -80 – 80 |
| Encoder Centre Y | 0 mm | -50 – 50 |
| Encoder Keying Slot Width | 2 mm | 0.5 – 8 |
| Encoder Keying Slot Length | 7 mm | 1 – 20 |
| Encoder Slot Offset | 7 mm | 1 – 25 |
| Gap Between Printed Parts | 6 mm | 2 – 40 |
| Break-off Tab Width | 5 mm | 2 – 15 |
| Break-off Tab Thickness | 2 mm | 0.8 – 4 |
| Break-off Tab Overlap | 2 mm | 0.5 – 8 |
| Break-off Tab Y Offset | 18 mm | 2 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.