Mechanical parts
Trigger (part 7)
- Bounding box
- 12.0 × 35.0 × 12.6 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Smart acetabular reamer, part 7: pivoting variable-speed trigger, 12 wide, 32 long below the pivot, concave finger face, 3 mm pivot hole, magnet pocket for a Hall-effect speed sensor, return spring seat. Origin at the pivot centre, X = pivot axis, -Y down the trigger, +Z toward the finger face.
Parameters
| Name | Value | Range |
|---|---|---|
| Width (X) | 12 mm | 8 – 14 |
| Length below pivot | 32 mm | 24 – 40 |
| Depth at top | 14 mm | 10 – 18 |
| Depth at bottom | 10 mm | 6 – 14 |
| Finger face radius | 60 mm | 30 – 120 |
| Pivot hole | 3 mm | 2 – 4 |
| Magnet pocket diameter | 4 mm | 2 – 6 |
| Magnet pocket depth | 3 mm | 1 – 5 |
| Edge fillet | 1.5 mm | 0 – 2.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
