Jigs and fixtures
Tri-Facet HC-SR04 Bumper - Corrected Orientation
- Bounding box
- 195.0 × 49.6 × 32.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
195mm three-zone tracked robot sensor bumper with correctly oriented six sensor bores and two 80mm spaced M3 tabs.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 195 mm | 180 – 225 |
| Bumper height | 32 mm | 28 – 42 |
| Body wall depth | 16 mm | 14 – 22 |
| Side angle | 40 deg | 30 – 45 |
| Flat face length | 58 mm | 54 – 62 |
| Transducer bore diameter | 16.5 mm | 16 – 18 |
| Transducer spacing | 26 mm | 25 – 28 |
| PCB recess width | 46.5 mm | 45 – 48 |
| PCB cradle height | 21.5 mm | 20 – 24 |
| Front structural skin | 3.5 mm | 3 – 5 |
| Cable exit width | 15 mm | 12 – 18 |
| Cable exit height | 6 mm | 5 – 7 |
| Chassis tab width | 16 mm | 14 – 20 |
| Chassis tab length | 20 mm | 18 – 26 |
| Chassis tab thickness | 5 mm | 4 – 7 |
| Tab bolt spacing | 80 mm | 75 – 85 |
| M3 clearance diameter | 3.2 mm | 3.1 – 3.6 |
| Bolt center behind rear face | 12 mm | 10 – 15 |
| Top edge rounding | 3 mm | 1 – 3 |
| Facet corner rounding | 8 mm | 4 – 8 |
| Outer tip rounding | 6 mm | 2 – 6 |
| Front bore entry chamfer | 0.8 mm | 0.4 – 1 |
| Oscillator relief width | 10 mm | 8 – 12 |
| Oscillator relief height | 5 mm | 4 – 6 |
| Oscillator relief depth | 1.5 mm | 1 – 2 |
| Rear clip detent thickness | 2.5 mm | 2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
