Mechanical parts
Transparent Motorised 2-Axis Camera Module (assembled, split parts)
- Bounding box
- 74 × 73.6 × 58.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 41
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
i would like the 2 pivot shaft indepent of each other as welll as the slip ring aand the four screws alll this shouldd be there own files not attahed
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded spacing between parts | 70 mm | 45 – 150 |
| Exploded view (1=on, 0=assembled) | 0 mm | 0 – 1 |
| Base plate side | 50 mm | 30 – 120 |
| Base plate thickness | 3 mm | 2 – 10 |
| Host mounting hole dia | 2.4 mm | 1.6 – 6 |
| Host mounting hole spacing | 40 mm | 20 – 100 |
| Dome screw hole dia | 2.4 mm | 1.6 – 6 |
| Dome screw spacing on a side | 33 mm | 20 – 60 |
| Pan bearing ring outer dia | 40 mm | 20 – 80 |
| Pan bearing ring height | 5 mm | 2 – 15 |
| Pan bearing ring bore | 22 mm | 10 – 60 |
| Pan platform dia | 36 mm | 20 – 80 |
| Pan platform thickness | 4 mm | 2 – 12 |
| Pan gear tooth count | 24 mm | 8 – 60 |
| Pan motor body dia | 12 mm | 6 – 30 |
| Pan motor body length | 20 mm | 8 – 60 |
| Slip ring dia | 12 mm | 6 – 30 |
| Slip ring height | 8 mm | 3 – 30 |
| Yoke overall width | 34 mm | 20 – 80 |
| Yoke overall height | 30 mm | 15 – 80 |
| Yoke arm thickness | 4 mm | 2 – 10 |
| Yoke depth | 8 mm | 4 – 30 |
| Pivot shaft dia | 3 mm | 1.5 – 8 |
| Pivot shaft length | 8 mm | 3 – 25 |
| Pivot height above yoke base | 22 mm | 10 – 70 |
| Tilt motor body dia | 10 mm | 5 – 25 |
| Tilt motor body length | 16 mm | 6 – 50 |
| Camera carrier width | 24 mm | 10 – 60 |
| Camera carrier height | 18 mm | 10 – 60 |
| Camera carrier thickness | 5 mm | 2 – 15 |
| Camera board width | 22 mm | 8 – 50 |
| Camera board height | 16 mm | 8 – 50 |
| Camera board thickness | 4 mm | 2 – 12 |
| Dome diameter | 70 mm | 20 – 120 |
| Dome overall height | 55 mm | 20 – 120 |
| Dome wall thickness | 2 mm | 1.2 – 6 |
| Dome flange diameter | 74 mm | 20 – 130 |
| Dome flange thickness | 4 mm | 1 – 12 |
| Screw shank dia | 2 mm | 1.2 – 5 |
| Screw length | 6 mm | 3 – 20 |
| Gasket thickness | 0.5 mm | 0.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.