Mechanical parts
Toggle Linkage Assembly
- Bounding box
- 62.2 × 97.9 × 18.3 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
17-4 PH Stainless Steel toggle linkage. Pocketed design to hold a 0.5mm wire diameter compression helper spring behind its pivot axis.
Parameters
| Name | Value | Range |
|---|---|---|
| Drive Link Length | 60 mm | 40 – 100 |
| Drive Link Width | 12 mm | 8 – 25 |
| Drive Link Thickness | 6 mm | 3 – 12 |
| Drive Link Pin Hole Dia | 4 mm | 2 – 8 |
| Spring Pocket Diameter | 8 mm | 5 – 14 |
| Spring Pocket Depth | 4 mm | 2 – 6 |
| Output Link Length | 55 mm | 35 – 90 |
| Output Link Width | 12 mm | 8 – 25 |
| Output Link Thickness | 6 mm | 3 – 12 |
| Output Link Pin Hole Dia | 4 mm | 2 – 8 |
| Lightening Pocket Width | 6 mm | 3 – 10 |
| Lightening Pocket Height | 10 mm | 5 – 20 |
| Pivot Block Width | 16 mm | 10 – 30 |
| Pivot Block Height | 16 mm | 10 – 30 |
| Pivot Block Thickness | 10 mm | 6 – 20 |
| Pivot Pin Diameter | 4 mm | 2 – 8 |
| Spring Seat Counterbore Dia | 7 mm | 4 – 12 |
| Spring Seat Counterbore Depth | 2 mm | 1 – 4 |
| Spring Wire Diameter | 0.5 mm | 0.3 – 1.5 |
| Spring OD | 6 mm | 3 – 12 |
| Spring Free Length | 10 mm | 5 – 25 |
| Spring Active Coils | 8 | 4 – 20 |
| Center Pivot Pin Length | 14 mm | 8 – 25 |
| Fixed Frame Pin Length | 12 mm | 8 – 25 |
| Cotter Pin Groove Width | 1 mm | 0.5 – 2 |
| Cotter Pin Groove Depth | 0.5 mm | 0.2 – 1 |
| Drive Link Angle (from vertical) | 30 deg | 10 – 60 |
| Output Link Angle (from vertical) | 20 deg | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.