Mechanical parts
Three-Joint Fork-Type Articulated Arm
- Bounding box
- 1050.0 × 140.0 × 192.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Make a a three joint articulated arm with the joints being of the fork type. Each joint should be 300 mm. Size it for 100kg load at full extension horizontally. Material is aluminium.
Parameters
| Name | Value | Range |
|---|---|---|
| Number of Fork Joints | 3 pcs | 2 – 5 |
| Joint Centre Spacing | 300 mm | 100 – 600 |
| Tongue / Fork Length | 70 mm | 20 – 150 |
| Tongue Thickness | 19.6 mm | 5 – 60 |
| Fork Slot Width | 20 mm | 5 – 60 |
| Clevis Pin Diameter | 16 mm | 4 – 60 |
| Pin Head Diameter | 26 mm | 6 – 80 |
| Pin Head Thickness | 6 mm | 2 – 20 |
| Link Width (Y) | 50 mm | 20 – 120 |
| Link Height (Z) | 80 mm | 30 – 200 |
| Base Block Length | 120 mm | 60 – 250 |
| Base Block Width | 70 mm | 30 – 200 |
| Base Block Height | 180 mm | 80 – 400 |
| Base Plate Length | 210 mm | 120 – 400 |
| Base Plate Width | 140 mm | 80 – 300 |
| Base Plate Thickness | 12 mm | 5 – 40 |
| Base Bolt Hole Dia | 12 mm | 4 – 30 |
| Tool Flange Thickness | 25 mm | 8 – 60 |
| Tool Flange Size | 100 mm | 40 – 250 |
| Tool Mounting Hole Dia | 9 mm | 3 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.