Mechanical parts
Thin-Wall 608 Spinner Hub (Open Bottom)
- Bounding box
- 120.3 × 125.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
make the spinner with thinner walls, ab le to fit 608 bearings and no bottom
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Diameter | 130 mm | 60 – 250 |
| Body Thickness (axial) | 10 mm | 5 – 25 |
| Center Hub Diameter | 40 mm | 24 – 90 |
| Pod Diameter (sets wall = (pod-bore)/2) | 28 mm | 22 – 60 |
| Arm Width | 8 mm | 4 – 25 |
| Pod Count (n-fold balanced) | 5 count | 3 – 8 |
| Bearing Seat Dia (608 = 22) | 22 mm | 10 – 50 |
| Bearing Width (608 = 7) | 7 mm | 4 – 20 |
| Retaining Lip Width | 2 mm | 0.5 – 5 |
| Top Rim Fillet Radius | 1.5 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.