Mechanical parts
Telescoping Tube Clamp with Thumb Screw and Dual Tapped Holes
- Bounding box
- 35.0 × 30.0 × 70.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Also draw the thumb-screw bolt. Add a threaded hole below the existing hole on the outer tube.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 30 mm | 10 – 100 |
| Outer Wall Thickness | 3 mm | 1 – 10 |
| Outer Sleeve Length | 50 mm | 10 – 200 |
| Inner Tube Outer Diameter | 20 mm | 5 – 80 |
| Inner Tube Wall Thickness | 2 mm | 1 – 10 |
| Inner Tube Length | 70 mm | 10 – 300 |
| Index Hole Diameter | 5 mm | 1 – 20 |
| Index Hole Pitch | 12 mm | 1 – 50 |
| Index Hole Count | 3 | 1 – 20 |
| First Index Hole Z | 15 mm | 0 – 200 |
| Thumb Screw Z | 25 mm | 0 – 200 |
| Second Tapped Hole Z | 10 mm | 0 – 200 |
| Tapped Hole Diameter | 5 mm | 1 – 20 |
| Screw Shank Diameter | 5 mm | 1 – 20 |
| Screw Shank Length | 30 mm | 1 – 100 |
| Screw Head Diameter | 12 mm | 3 – 50 |
| Screw Head Height | 5 mm | 1 – 20 |
| Knurl Count | 12 | 3 – 60 |
| Knurl Hole Diameter | 2 mm | 0.5 – 10 |
| Edge Chamfer | 0.5 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.