Mechanical parts
Telescoping Sleeve with Index Holes and Thumb Screw
- Bounding box
- 38.4 × 32.0 × 140.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
A sleeve structure, the inner tube is provided with equally spaced holes; the inner and outer tubes are connected by a thumb screw.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Tube OD | 32 mm | 18 – 80 |
| Outer Tube Wall | 3 mm | 1.5 – 10 |
| Outer Tube Length | 55 mm | 15 – 200 |
| Inner Tube OD | 25.6 mm | 12 – 70 |
| Inner Tube Wall | 2 mm | 1 – 8 |
| Inner Tube Length | 140 mm | 40 – 400 |
| Index Hole Diameter | 5 mm | 1.5 – 15 |
| Index Hole Count | 7 pcs | 2 – 20 |
| Index Hole Pitch | 15 mm | 4 – 50 |
| First Hole Height | 20 mm | 5 – 80 |
| Thumb Screw Height | 35 mm | 5 – 50 |
| Sleeve Tapped Hole Dia | 5 mm | 2 – 12 |
| Shank Diameter | 6 mm | 3 – 16 |
| Shank Length | 10 mm | 4 – 40 |
| Knurled Head Dia | 16 mm | 8 – 40 |
| Knurled Head Thickness | 7 mm | 3 – 20 |
| Knurl Groove Count | 16 pcs | 4 – 40 |
| Knurl Groove Dia | 1.8 mm | 0.6 – 4 |
| Tube End Chamfer | 0.5 mm | 0 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.