Mechanical parts
Teensy 4.0 Development Board Assembly
- Bounding box
- 38.0 × 18.0 × 5.1 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
{ "part": "Teensy 4.0", "manufacturer": "PJRC", "category": "development_board", "dimensions": { "length_mm": 35.0, "width_mm": 18.0, "height_mm": 4.6 }, "pcb": { "thickness_mm": 1.6 }, "holes": { "finished_diameter_mm": 0.965, "count": 34 }, "form_factor": { "width_in": 0.7, "length_in": 1.4 }, "interfaces": { "digital_pins": 40, "analog_inputs": 14, "pwm": 31, "serial": 7, "spi": 3, "i2c": 3, "can": 3, "usb": "480 Mbit/s" }, "processor": { "model": "NXP i.MX RT1062", "architecture": "ARM Cortex-M7", "clock_mhz": 600 } }
Parameters
| Name | Value | Range |
|---|---|---|
| PCB Length (X) | 35 mm | 20 – 60 |
| PCB Width (Y) | 18 mm | 10 – 40 |
| PCB Thickness | 1.6 mm | 0.6 – 3.2 |
| Through-Hole Dia | 0.97 mm | 0.3 – 2 |
| Hole Pitch | 2.54 mm | 1 – 5 |
| Holes Per Long Row | 14 count | 2 – 20 |
| Row Y Offset | 7.62 mm | 2 – 20 |
| Extra Hole Columns | 3 count | 0 – 6 |
| Extra Hole Rows | 2 count | 1 – 4 |
| Extra Grid Margin From Rear Edge | 1.5 mm | 0.5 – 8 |
| Extra Grid Y Spacing | 1.5 mm | 0.2 – 6 |
| MCU Length (X) | 12 mm | 4 – 20 |
| MCU Width (Y) | 12 mm | 4 – 18 |
| MCU Height | 1.2 mm | 0.4 – 4 |
| USB Shell Width (Y) | 8 mm | 4 – 14 |
| USB Shell Depth (X) | 5 mm | 2 – 12 |
| USB Shell Height (Z) | 3 mm | 1.5 – 8 |
| Overlap Onto PCB (X) | 2 mm | 0 – 4 |
| Header Body Length (X) | 25.4 mm | 5 – 35 |
| Header Body Width (Y) | 5.1 mm | 2.54 – 10 |
| Header Body Height (Z) | 2.5 mm | 1 – 8 |
| Pin Pitch | 2.54 mm | 1 – 5 |
| Pins Per Row | 10 count | 2 – 20 |
| Header Rows | 2 count | 1 – 3 |
| Square Pin Side | 0.64 mm | 0.2 – 1.5 |
| Pin Protrusion Below PCB | 0.5 mm | 0 – 3 |
| Header Centre Y Offset | 6.35 mm | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.