Mechanical parts
Tectal visor screw + nut
- Bounding box
- 34.0 × 14 × 14.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
POC Tectal visor screw replacement, printed screw plus printed mating threaded part (no metal nut)
Parameters
| Name | Value | Range |
|---|---|---|
| Thread diameter | 6 mm | 4 – 12 |
| Thread pitch | 1 mm | 0.5 – 2 |
| Thread clearance per side | 0.15 mm | 0 – 0.4 |
| Shank length | 10 mm | 4 – 30 |
| Head diameter | 14 mm | 8 – 30 |
| Head height | 4 mm | 2 – 10 |
| Head grip notches | 18 mm | 0 – 40 |
| Screwdriver slot width, 0 = none | 1.2 mm | 0 – 3 |
| Threaded boss length | 6 mm | 3 – 20 |
| Boss outer diameter | 10 mm | 6 – 20 |
| Flange diameter | 14 mm | 8 – 30 |
| Flange thickness | 1.5 mm | 0.8 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.