Mechanical parts
Tabletop Letterpress - Lever Operated
- Bounding box
- 200.0 × 271.0 × 155.1 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
it should be lever operated and pates should be in the positions like old ones
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 200 mm | 80 – 400 |
| Base Depth | 160 mm | 60 – 320 |
| Base Height | 20 mm | 5 – 60 |
| Base Bolt Hole Dia | 6 mm | 2 – 20 |
| Cheek Thickness | 12 mm | 4 – 40 |
| Cheek Height | 60 mm | 20 – 160 |
| Cheek Depth | 90 mm | 20 – 220 |
| Crown Height | 22 mm | 8 – 60 |
| Crown Depth | 40 mm | 10 – 120 |
| Platen Length | 120 mm | 40 – 300 |
| Platen Depth | 90 mm | 30 – 220 |
| Platen Thickness | 14 mm | 5 – 40 |
| Daylight (Platen Gap) | 40 mm | 5 – 150 |
| Type Bed Length | 120 mm | 40 – 300 |
| Type Bed Depth | 90 mm | 30 – 220 |
| Type Bed Thickness | 12 mm | 4 – 40 |
| Bed Rim Width | 10 mm | 2 – 30 |
| Bed Recess Depth | 6 mm | 1 – 25 |
| Chase Length | 90 mm | 20 – 280 |
| Chase Depth | 60 mm | 20 – 200 |
| Chase Frame Bar | 10 mm | 3 – 40 |
| Chase Thickness | 6 mm | 2 – 24 |
| Frisket Frame Bar | 8 mm | 3 – 30 |
| Frisket Thickness | 3 mm | 1 – 12 |
| Pressure Screw Dia | 18 mm | 6 – 50 |
| Screw Above Crown | 30 mm | 5 – 120 |
| Tommy Bar Dia | 10 mm | 4 – 30 |
| Tommy Bar Length | 110 mm | 30 – 300 |
| Ball Knob Dia | 22 mm | 8 – 60 |
| Upright Height | 55 mm | 20 – 140 |
| Upright Spacing | 36 mm | 16 – 100 |
| Upright Thickness | 10 mm | 4 – 30 |
| Upright Depth | 26 mm | 10 – 80 |
| Pivot Pin Dia | 10 mm | 4 – 30 |
| Lever Arm Dia | 16 mm | 6 – 45 |
| Lever Arm Length | 180 mm | 60 – 420 |
| Counterweight Arm | 55 mm | 15 – 180 |
| Grip Dia | 22 mm | 8 – 60 |
| Grip Length | 90 mm | 30 – 220 |
| Counterweight Dia | 40 mm | 12 – 100 |
| Link Rod Dia | 10 mm | 4 – 30 |
| Fillet Radius | 3 mm | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.