Mechanical parts
SWYFT Reference-Style 2.5 inch Mold 10 Spokes 16mm
- Bounding box
- 83.5 × 83.5 × 21 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 63.5 mm. Cavity thickness: 16 mm. 10 curved spokes. Circular 19.5 mm hub, rounded outer tabs, REX shaft profile, same overall mold construction. Do not alter other features.
Parameters
| Name | Value | Range |
|---|---|---|
| Maximum outside diameter including all outer tabs | 63.5 mm | 50 – 120 |
| Cast wheel thickness / mold cavity depth | 16 mm | 6 – 20 |
| Circular center hub outside diameter | 19.5 mm | 12 – 30 |
| Number of internal curved spokes | 10 mm | 6 – 18 |
| Curved spoke width | 6.5 mm | 3 – 10 |
| Tangential spoke sweep from hub to rim | -20 deg | -35 – 35 |
| Outer ring radial width | 5 mm | 3 – 9 |
| Rounded outer tab count | 12 mm | 6 – 18 |
| Rounded tab radial length | 7 mm | 4 – 12 |
| Rounded tab tangential width | 5.5 mm | 3 – 9 |
| Rounded tab corner radius | 1.3 mm | 0.5 – 2 |
| REX round envelope with casting clearance | 8.1 mm | 8 – 8.5 |
| REX hex across flats with casting clearance | 7.1 mm | 7 – 7.5 |
| Border around the wheel cavity | 10 mm | 6 – 20 |
| Solid floor under the cavity | 5 mm | 3 – 10 |
| Mold outside corner radius | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.