Mechanical parts
Swingarm with Coil-Spring Perches
- Bounding box
- 222.0 × 146.0 × 76.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
what abt the spring where do put it take dis as a blue print
Parameters
| Name | Value | Range |
|---|---|---|
| Pivot to Axle | 200 mm | 120 – 320 |
| Inner Gap Between Arms | 90 mm | 60 – 140 |
| Arm Thickness | 8 mm | 4 – 16 |
| Arm Height at Pivot | 34 mm | 20 – 60 |
| Arm Height at Axle | 20 mm | 12 – 40 |
| Pivot Boss Diameter | 44 mm | 26 – 70 |
| Pivot Bore Diameter | 16 mm | 8 – 30 |
| Axle Slot Width | 12 mm | 8 – 20 |
| Axle Slot Length | 30 mm | 15 – 55 |
| Cross Brace X Offset | 45 mm | 15 – 90 |
| Cross Brace Length | 22 mm | 10 – 50 |
| Cross Brace Height | 22 mm | 10 – 45 |
| Caliper Bolt Spacing | 51 mm | 30 – 80 |
| Caliper Bolt Hole Dia | 6.5 mm | 4 – 10 |
| Caliper Mount X Offset | 40 mm | 20 – 90 |
| Caliper Bolt Height | 20 mm | 0 – 45 |
| Caliper Plate Height | 46 mm | 24 – 80 |
| Caliper Plate Thickness | 8 mm | 4 – 16 |
| Spring Perch X Position | 62 mm | 25 – 140 |
| Spring Perch Outside Dia | 48 mm | 30 – 80 |
| Spring Seat Pocket Dia | 40 mm | 24 – 70 |
| Spring Seat Pocket Depth | 3 mm | 0.5 – 8 |
| Spring Perch Height | 10 mm | 3 – 30 |
| Spring Retaining Bolt Dia | 8.5 mm | 4 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.