Mechanical parts
Suspension Control Arm with Coil Spring
- Bounding box
- 210.0 × 207.0 × 129.5 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
suspension spring
Parameters
| Name | Value | Range |
|---|---|---|
| Bushing Centre Span | 180 mm | 80 – 320 |
| Arm Length (rear axis to ball joint) | 170 mm | 60 – 350 |
| Plate Thickness | 6 mm | 3 – 20 |
| Rear Corner Fillet | 3 mm | 0 – 10 |
| Bushing Sleeve OD | 30 mm | 12 – 60 |
| Bushing Sleeve Length | 40 mm | 10 – 90 |
| Bushing Bore | 12 mm | 4 – 30 |
| Ball Joint Boss OD | 34 mm | 12 – 70 |
| Ball Joint Bore | 14 mm | 4 – 35 |
| Ball Joint Boss Height | 18 mm | 6 – 50 |
| Spring Seat Position along Arm | 70 mm | 10 – 150 |
| Spring Mean Coil Diameter | 46 mm | 20 – 90 |
| Spring Wire Diameter | 5 mm | 1.5 – 12 |
| Coil Pitch | 15 mm | 6 – 60 |
| Number of Coils | 7 rev | 2 – 20 |
| Spring Seat Diameter | 57 mm | 20 – 120 |
| Spring Seat Height | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.