Jigs and fixtures
Surf rack 45° rail joint
- Bounding box
- 48.0 × 45.0 × 170.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Bike surfboard rack: the two-sided 45° diamond rail joint between the arm and the cradle, with the height pin. Prints flat with no supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Rail width | 30 mm | 20 – 40 |
| Waist depth (45° each side) | 5 mm | 3 – 8 |
| Rail depth | 20 mm | 14 – 26 |
| Rail length | 60 mm | 40 – 90 |
| Sliding gap | 0.2 mm | 0.1 – 0.5 |
| Height pin diameter | 10 mm | 6 – 14 |
| Hole spacing | 20 mm | 15 – 30 |
| Number of heights | 6 | 3 – 8 |
| Cradle thickness | 44 mm | 36 – 56 |
| Cradle back wall | 8 mm | 5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
