Mechanical parts
Stepped Shaft with Flat, Cross-Hole & Square End
- Bounding box
- 1.1 × 1.3 × 4.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Stepped Shaft – Flat, Cross-Hole & Square End IN INCHES
Parameters
| Name | Value | Range |
|---|---|---|
| Journal Diameter | 0.5 in | 0.125 – 1.5 |
| Journal Length | 1 in | 0.25 – 3 |
| Middle Diameter | 0.88 in | 0.25 – 2 |
| Middle Length | 1.25 in | 0.25 – 3 |
| Shoulder Diameter | 1.25 in | 0.25 – 3 |
| Shoulder Length | 1 in | 0.25 – 3 |
| Square Drive Size (A/F) | 0.75 in | 0.25 – 2 |
| Square Drive Length | 0.75 in | 0.1 – 3 |
| Square End Chamfer | 0.03 in | 0 – 0.125 |
| Flat Depth | 0.15 in | 0.01 – 0.5 |
| Cross-Hole Diameter | 0.25 in | 0.0625 – 0.75 |
| Cross-Hole Height from Journal End | 0.63 in | 0 – 3 |
| Shoulder Fillet Radius | 0.03 in | 0 – 0.25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.