Mechanical parts
Steam Weeder Spray Boom
- Bounding box
- 500.0 × 25.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 16, 2026
Download
Free to download and use. See the terms.
The prompt
I want to make weeding aparatus for ecological farm using water steam. Idea: water tank behind the tractor on top using gravity water goes down the coil (it is heated I am thinking of butane gas and isolated to not get cold) then water turns to steam in coil and goes out the nosles that are close to black currant rows
Parameters
| Name | Value | Range |
|---|---|---|
| Manifold Length | 500 mm | 100 – 2000 |
| Outer Diameter | 25 mm | 10 – 100 |
| Wall Thickness | 3 mm | 1 – 8 |
| Inlet Boss Diameter | 20 mm | 8 – 60 |
| Inlet Boss Height | 15 mm | 5 – 50 |
| Inlet Bore Diameter | 10 mm | 2 – 30 |
| Number of Nozzles | 5 | 1 – 20 |
| Nozzle Diameter | 3 mm | 0.5 – 10 |
| Nozzle Spacing | 80 mm | 20 – 500 |
| End Cap Thickness | 4 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.