Brackets and mounts
Steam Deck Pegboard Dock
- Bounding box
- 340 × 87 × 150 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a dock/stand/holder for a steamdeck that goes on a pegboard with 4mm holes and 25 mm pitch (distance between holes). The holder/ mount should have some extra space so that it fits a steamdeck with a killswitch brand cover. You can get dimensions of mentioned products online.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 340 mm | 250 – 450 |
| Depth of deck slot | 65 mm | 50 – 100 |
| Shelf thickness | 8 mm | 4 – 15 |
| Front lip height above shelf | 30 mm | 10 – 60 |
| Front lip thickness | 6 mm | 3 – 12 |
| Backplate height | 150 mm | 100 – 300 |
| Backplate thickness | 6 mm | 3 – 12 |
| Side wall thickness | 6 mm | 3 – 12 |
| Side wall height above shelf | 35 mm | 10 – 80 |
| Peg diameter for 4 mm holes | 3.6 mm | 3 – 4 |
| Peg insertion length | 10 mm | 5 – 20 |
| Pegboard hole pitch | 25 mm | 20 – 30 |
| Number of peg columns | 4 mm | 2 – 6 |
| Number of peg rows | 2 mm | 1 – 5 |
| Horizontal pitch multiplier | 4 mm | 1 – 8 |
| Vertical pitch multiplier | 3 mm | 1 – 8 |
| Height of bottom peg row | 40 mm | 0 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and