Jigs and fixtures
Star Wars Unlimited Toploader Display Stand
- Bounding box
- 269.9 × 62 × 12 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
### Espositore per carte in Toploader – Star Wars: Unlimited Espositore elegante e funzionale progettato per valorizzare le carte da collezione di **Star Wars: Unlimited** inserite all'interno di Toploader protettivi. La struttura è studiata per mantenere le carte **perfettamente verticali, ordinate e ben visibili**, proteggendole al tempo stesso da cadute accidentali e facilitandone l'esposizione. L'espositore presenta una base stabile con apposite scanalature per alloggiare i Toploader, permettendo di esporre più carte contemporaneamente senza che si tocchino o si sovrappongano. Il design può essere realizzato in stile **minimalista e moderno**, oppure personalizzato con elementi grafici ispirati all'universo di Star Wars. **Caratteristiche principali:** - Compatibile con carte da gioco inserite in Toploader standard. - Alloggiamenti studiati per mantenere le carte dritte e stabili. - Base robusta e antiribaltamento. - Possibilità di esporre più carte affiancate. - Design compatto, ideale per scrivania, mensola o vetrina. - Possibilità di personalizzazione con logo, nome del set o tema Star Wars: Unlimited. - Pensato sia per collezionisti sia per esposizione delle carte più rare e pregiate. Un espositore pensato per trasformare la propria collezione di **Star Wars: Unlimited** in una vera esposizione, dando risalto alle carte senza doverle rimuovere dalla loro protezione.
Parameters
| Name | Value | Range |
|---|---|---|
| Cards displayed | 3 mm | 1 – 6 |
| Toploader width | 79 mm | 60 – 100 |
| Toploader thickness | 2.2 mm | 1.2 – 5 |
| Clearance per side | 0.45 mm | 0.2 – 1 |
| Insertion depth | 8 mm | 4 – 14 |
| Gap between cards | 8 mm | 4 – 25 |
| Side margin | 8 mm | 4 – 30 |
| Base depth | 62 mm | 40 – 120 |
| Base height | 12 mm | 8 – 25 |
| Corner radius | 6 mm | 1 – 20 |
| Text height | 9 mm | 4 – 16 |
| Engraving depth | 0.8 mm | 0.6 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
