Jigs and fixtures
Stampi per ravioli quadrati 40 × 40 mm
- Bounding box
- 58.0 × 58.0 × 29.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Due stampi complementari per ravioli fatti in casa, dimensione raviolo 4x4 cm. Base e coperchio per un raviolo, cavita da 30 mm e profondita 6 mm per meta, guide di allineamento e bordo per taglio assistito. Prototipo da verificare con la sfoglia.
Parameters
| Name | Value | Range |
|---|---|---|
| Lato raviolo | 40 mm | 36 – 60 |
| Diametro cavita | 30 mm | 20 – 32 |
| Profondita per meta | 6 mm | 3 – 8 |
| Lato corpo | 58 mm | 56 – 80 |
| Spessore corpo | 12 mm | 11 – 18 |
| Rilievo piano chiusura | 2 mm | 1.5 – 3 |
| Spazio sfoglie a chiusura | 1 mm | 0.6 – 1.6 |
| Base bordo taglio | 0.6 mm | 0.4 – 0.9 |
| Sommità bordo taglio | 0.25 mm | 0.2 – 0.35 |
| Diametro perni | 4 mm | 3 – 4.5 |
| Altezza perni | 10 mm | 9 – 12 |
| Gioco radiale perni | 0.25 mm | 0.15 – 0.4 |
| Posizione perni dal centro | 24 mm | 23 – 25 |
| Raggio angoli corpo | 3 mm | 2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
