Mechanical parts
Spooky Pickle Storage Container (2-part twist-on)
- Bounding box
- 57.4 × 57.4 × 210.9 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
optimize for 3d print. I want a spooky pickle, in the spirit of hallowheen, the pickle should have at least 20cm height. make it unscrew-able from approximately 3cm after the middle up, so there can be various things to store in it. also, dont forget to add a little curvature to the pickle, pickels arent perfectly straight! also add little details on the surface true to a pickle. because spooky, the surface should have stitch and seam details, also add a subtle spooky face embossed into the surface on a random side.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 210 mm | 200 – 320 |
| Max Body Diameter | 56 mm | 30 – 90 |
| Body Curvature (bow) | 15 mm | 0 – 40 |
| Split Height (joint plane) | 135 mm | 100 – 200 |
| Storage Cavity Diameter | 28 mm | 10 – 50 |
| Storage Cavity Depth | 90 mm | 20 – 160 |
| Spigot / Socket Length | 28 mm | 10 – 60 |
| Joint Clearance (radial) | 0.4 mm | 0.1 – 1.5 |
| Face Emboss Depth | 1 mm | 0.2 – 3 |
| Stitch Dimple Count | 10 count | 0 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.