Enclosures and housings
Split Box with Tongue-Groove and Hexagonal Vent Pattern
- Bounding box
- 256.0 × 251.0 × 124.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Sketch a regular hexagon with a flat-to-flat width of 5.0mm on a vertical side panel measuring 243mm by 120mm. Extrude the hexagon as a negative boolean cut completely through the 4.0mm wall thickness. Pattern this negative cutout feature across the panel face using a linear matrix array. Set the horizontal spacing center-to-center to 8.0mm and the vertical spacing center-to-center to 8.0mm. Leave a solid 15mm border frame along all outer perimeter edges of the panel face without any cuts.
Parameters
| Name | Value | Range |
|---|---|---|
| Width (X) | 248 mm | 50 – 500 |
| Depth (Y) | 243 mm | 50 – 500 |
| Height (Z) | 120 mm | 10 – 500 |
| Wall Thickness | 4 mm | 1 – 20 |
| Back Cutout Width | 200 mm | 10 – 240 |
| Back Cutout Height | 80 mm | 10 – 200 |
| Cutout Offset from Floor | 5 mm | 0 – 50 |
| Tongue Width (Z) | 2 mm | 0.5 – 10 |
| Tongue Depth (Y) | 3 mm | 1 – 10 |
| Groove Width (Z) | 2.2 mm | 0.5 – 10 |
| Groove Depth (Y) | 3.2 mm | 1 – 10 |
| Hex Flat-to-Flat Width | 5 mm | 1 – 20 |
| Border Margin | 15 mm | 5 – 50 |
| Horizontal Spacing (Y) | 8 mm | 5 – 30 |
| Vertical Spacing (Z) | 8 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox