Mechanical parts
Snap-Fit Hollow Cube
- Bounding box
- 25.0 × 20.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 23, 2026
Download
Free to download and use. See the terms.
The prompt
Acctually lets change a little lets make a single hollow cube 20mm, 1.2mm walls, with snap fit hinge pins: 2 male pins on one side, 2 female sockets on opposite side,0.4mm tolerance,0.3mm bottom chamfer FDM PLA
Parameters
| Name | Value | Range |
|---|---|---|
| Cube Size | 20 mm | 10 – 60 |
| Wall Thickness | 1.2 mm | 0.6 – 5 |
| Bottom Chamfer | 0.3 mm | 0 – 1.5 |
| Pin Diameter | 3 mm | 1 – 8 |
| Pin Protrusion | 5 mm | 2 – 15 |
| Pin Spacing | 10 mm | 2 – 40 |
| Barb Land Length | 0.8 mm | 0.3 – 3 |
| Barb Oversize (dia.) | 0.7 mm | 0.2 – 2 |
| Pin Tip Chamfer | 0.4 mm | 0.1 – 1 |
| Socket Clearance (dia.) | 0.4 mm | 0.1 – 1.5 |
| Socket Depth | 3.6 mm | 1.5 – 10 |
| Socket Boss OD | 5 mm | 3 – 12 |
| Socket Lead-in Chamfer | 0.3 mm | 0 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.