Mechanical parts
Snap-Fit HMI Enclosure
- Bounding box
- 280.0 × 80.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
rebuild use latch instead of screws solution
Parameters
| Name | Value | Range |
|---|---|---|
| Top Width | 130 mm | 100 – 200 |
| Top Height | 80 mm | 50 – 150 |
| Top Depth | 10 mm | 6 – 20 |
| Corner Radius | 8 mm | 1 – 20 |
| Wall Thickness | 2 mm | 1 – 4 |
| Front Face Thickness | 2 mm | 0.5 – 5 |
| Bezel Width | 1 mm | 0.5 – 3 |
| Display Recess Depth | 0.5 mm | 0.1 – 3 |
| Display Opening Width | 120 mm | 80 – 150 |
| Display Opening Height | 67 mm | 50 – 100 |
| Alignment Pin Diameter | 3 mm | 1 – 6 |
| Alignment Pin Height | 4 mm | 1 – 8 |
| Bottom Width | 130 mm | 100 – 200 |
| Bottom Height | 80 mm | 50 – 150 |
| Bottom Depth | 8 mm | 5 – 20 |
| Bottom Wall Thickness | 2.5 mm | 1 – 5 |
| Alignment Socket Boss Diameter | 6 mm | 4 – 12 |
| PCB Standoff Diameter | 6 mm | 4 – 10 |
| PCB Standoff Height | 5 mm | 3 – 10 |
| PCB Pilot Hole Diameter | 2.5 mm | 1 – 4 |
| VESA Pitch | 75 mm | 50 – 100 |
| Keyhole Diameter | 8 mm | 5 – 12 |
| Keyhole Slot Width | 4 mm | 2 – 8 |
| Keyhole Slot Length | 12 mm | 6 – 20 |
| USB-C Cutout Width | 10 mm | 6 – 15 |
| USB-C Cutout Height | 4 mm | 2 – 8 |
| microSD Cutout Width | 12 mm | 8 – 18 |
| microSD Cutout Height | 2 mm | 1 – 5 |
| Number of Latches | 4 | 2 – 12 |
| Latch Tab Width | 8 mm | 3 – 15 |
| Latch Tab Depth | 2 mm | 0.5 – 5 |
| Latch Tab Thickness | 1.5 mm | 0.5 – 4 |
| Latch Recess Width | 8.5 mm | 3 – 15 |
| Latch Recess Depth | 1 mm | 0.2 – 4 |
| Latch Recess Height | 3 mm | 1 – 6 |
| Exploded View Gap | 20 mm | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.