Mechanical parts
Smart Glasses Frame
- Bounding box
- 140 × 146.8 × 46 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Generate an OpenSCAD 3D printable model of smart glasses frame. Include a front frame for 52x38mm lenses with a bridge. Add left temple arm with an internal hollow battery compartment (35x12x6mm). Add right temple arm with an internal hollow PCB compartment (35x12x6mm). Add hidden 2.2mm screw holes for M2 bolts at the temple hinges with countersink recesses. Add a 6x6mm micro switch button slot at the bottom of the right temple. Add a 2mm camera hole in the front bridge. Ensure model is watertight and clean manifold.
Parameters
| Name | Value | Range |
|---|---|---|
| Lens opening width | 52 mm | 30 – 70 |
| Lens opening height | 38 mm | 20 – 60 |
| Gap between lens openings | 18 mm | 10 – 30 |
| Frame rim width | 4 mm | 2 – 8 |
| Lens corner radius | 7 mm | 2 – 15 |
| Frame thickness | 3.5 mm | 2 – 6 |
| Bridge bar height | 12 mm | 6 – 20 |
| Hinge screw axis height | 30 mm | 10 – 50 |
| Hinge screw axis depth | 5 mm | 2 – 15 |
| Hinge tab width | 8 mm | 5 – 12 |
| Hinge tab length | 8 mm | 5 – 14 |
| Hinge knuckle height | 6 mm | 4 – 12 |
| M2 clearance hole diameter | 2.2 mm | 1.6 – 3.2 |
| Countersink diameter | 4.2 mm | 3 – 6 |
| Countersink depth | 1 mm | 0.4 – 2 |
| Knuckle overlap | 0.5 mm | 0 – 1 |
| Temple length from hinge | 140 mm | 100 – 170 |
| Temple housing width | 10 mm | 6 – 16 |
| Temple housing height | 15 mm | 8 – 22 |
| Temple tip width | 4 mm | 2 – 8 |
| Temple tip height | 8 mm | 4 – 14 |
| Rear taper length | 50 mm | 10 – 80 |
| Temple tip drop | 4 mm | 0 – 10 |
| Compartment length | 35 mm | 20 – 60 |
| Compartment width (X) | 6 mm | 3 – 10 |
| Compartment height (Z) | 12 mm | 6 – 20 |
| Compartment front Y | 18 mm | 10 – 50 |
| Compartment center Z | 30 mm | 10 – 50 |
| Micro-switch slot size | 6 mm | 3 – 10 |
| Switch slot Y position | 32 mm | 15 – 60 |
| Camera hole diameter | 2 mm | 1 – 4 |
| Camera hole Z height | 35 mm | 20 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.