Mechanical parts
Smart Eyeglasses with Hollow Frame and Arms
- Bounding box
- 150.0 × 50.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
: A stylish, thick-framed pair of wearable eyeglasses designed for a human head. The design must feature a main front frame for lenses and two straight temple arms connected by hinges. The frame must look like thick plastic fashion glasses but must be completely hollowed out on the inside. Specifically, create an internal cavity in the left arm for a tiny circuit board, a cavity in the right arm measuring 5mm x 20mm x 30mm for a small battery, a round button hole on the right arm, and a 9mm x 9mm square hole right in the center of the nose bridge facing forward for a camera lens.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Width | 140 mm | 100 – 180 |
| Frame Height | 50 mm | 30 – 80 |
| Frame Thickness | 10 mm | 4 – 20 |
| Wall Thickness | 2 mm | 0.5 – 4 |
| Lens Width | 48 mm | 30 – 70 |
| Lens Height | 32 mm | 20 – 50 |
| Bridge Width | 14 mm | 8 – 25 |
| Lens Corner Radius | 6 mm | 0 – 15 |
| Hinge Block Protrusion | 5 mm | 2 – 12 |
| Hinge Block Height | 8 mm | 4 – 16 |
| Hinge Pin Diameter | 2 mm | 0.5 – 4 |
| Camera Hole Size | 9 mm | 5 – 15 |
| Camera Hole Depth | 10 mm | 2 – 20 |
| Arm Length | 140 mm | 100 – 180 |
| Arm Width | 20 mm | 10 – 30 |
| Arm Height | 10 mm | 5 – 20 |
| Left Cavity Length | 30 mm | 10 – 100 |
| Left Cavity Width | 15 mm | 5 – 25 |
| Left Cavity Height | 6 mm | 2 – 10 |
| Right Cavity Length | 30 mm | 10 – 100 |
| Right Cavity Width | 20 mm | 8 – 28 |
| Right Cavity Height | 5 mm | 2 – 10 |
| Button Hole Diameter | 4 mm | 1 – 10 |
| Button Hole X Offset | 0 mm | -15 – 15 |
| Button Hole Distance from Front | 15 mm | 5 – 130 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.