Mechanical parts
Slotted Castle Nut M16
- Bounding box
- 27.7 × 24 × 19 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
- Internal M16 thread: Ø16 mm through-hole with an M16 metric thread. - Hexagonal body: 24 mm across the flats. - Total nut height: 19 mm. - Cylindrical upper collar: Ø22.5 mm in diameter. - 6 radial slots in the collar, spaced 60° apart, 4.5 mm wide and 13 mm deep from the top surface. - 0.8 mm x 45° chamfer on the top edge of the collar. - Thread axis along the Z-axis, with the origin at the center of the hole; 1:1 scale (in mm).
Parameters
| Name | Value | Range |
|---|---|---|
| Thread nominal diameter | 16 mm | 14 – 20 |
| Thread pitch | 2 mm | 1 – 3 |
| 3D-print thread diametral clearance | 0.25 mm | 0 – 0.6 |
| Hexagon width across flats | 24 mm | 20 – 32 |
| Total nut height | 19 mm | 14 – 28 |
| Collar outer diameter | 22.5 mm | 18 – 28 |
| Hex base chamfer | 1 mm | 0 – 2.5 |
| Slot depth from top surface | 13 mm | 6 – 16 |
| Slot width | 4.5 mm | 2 – 8 |
| Collar top rim chamfer | 0.8 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
