Mechanical parts
Sloped Cylinder with M10 Clearance Through-Hole and Bottom Blind Hole
- Bounding box
- 25.7 × 25.7 × 44.4 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Sloped cylinder OD 25.7 mm, low/high heights 32.16/44.36 mm. Replace the threaded M10 hole with a smooth straight 10.2 mm clearance through-hole for an M10 screw to pass through. Keep a 3.3 mm diameter, 6.6 mm deep blind hole drilled from the bottom toward the high side.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 25.7 mm | 20 – 40 |
| Low-side height | 32.16 mm | 20 – 50 |
| High-side height | 44.36 mm | 30 – 60 |
| Smooth M10 clearance through-hole diameter | 10.2 mm | 10 – 11 |
| Bottom blind hole diameter | 3.3 mm | 2 – 6 |
| Bottom blind hole depth | 6.6 mm | 2 – 15 |
| Blind hole X position toward high side | 8.5 mm | 6.7 – 10.5 |
| Blind hole Y position | 0 mm | -3 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.