Mechanical parts
Slim 7-inch curved column bracket — screw-on underside
- Bounding box
- 64 × 180.4 × 110 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Final revised no-lip design; true curved column saddle, front recessed 1-inch ratchet strap channel, 7-inch flat under-shelf arm, slim gusset, accessible counterbored underside screw holes offset from rib. Bambu P1S/A1.
Parameters
| Name | Value | Range |
|---|---|---|
| Column radius | 230.46 mm | 180 – 300 |
| Under-shelf length | 177.8 mm | 145 – 190 |
| Curved back width | 64 mm | 50 – 85 |
| Support arm width | 32 mm | 28 – 45 |
| Shelf top height | 82 mm | 65 – 110 |
| Arm thickness | 9 mm | 7 – 13 |
| Triangular rib thickness | 10 mm | 7 – 15 |
| Saddle face depth | 17 mm | 15 – 23 |
| Strap backing height | 28 mm | 27 – 35 |
| Groove height | 25.5 mm | 25 – 27 |
| Forward groove depth | 6.5 mm | 5 – 9 |
| Screw clearance hole | 4.3 mm | 3.5 – 5 |
| Screw counterbore | 8 mm | 6.5 – 9 |
| Head clearance depth | 3 mm | 2 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
