Mechanical parts
Sleeve with Single-Side Index Holes & Thumb Screw
- Bounding box
- 35.4 × 30.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Holes only on the thumb-screw side of the inner tube.
Parameters
| Name | Value | Range |
|---|---|---|
| Sleeve OD | 30 mm | 20 – 90 |
| Sleeve Wall | 3.1 mm | 1 – 8 |
| Sleeve Length | 40 mm | 10 – 150 |
| Inner Tube OD | 24 mm | 16 – 80 |
| Tube Wall | 2.5 mm | 1 – 6 |
| Tube Length | 100 mm | 20 – 250 |
| Index Hole Dia | 6.4 mm | 2 – 16 |
| Hole Pitch | 12 mm | 4 – 40 |
| Hole Count | 6 pcs | 1 – 12 |
| First Hole From End | 8 mm | 1 – 120 |
| Screw Position (Z) | 20 mm | 1 – 80 |
| Sleeve Tap Hole Dia | 6.2 mm | 2 – 16 |
| Shank Dia | 6 mm | 1 – 15 |
| Shank Length | 4.5 mm | 1 – 20 |
| Knurled Head Dia | 16 mm | 6 – 40 |
| Head Height | 6 mm | 2 – 20 |
| Knurl Notches | 12 pcs | 4 – 36 |
| Knurl Notch Dia | 2 mm | 0.5 – 5 |
| End Chamfer | 0.5 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.