Mechanical parts
Single-Slope Garage on Ground Screws
- Bounding box
- 9100.0 × 3850.0 × 5250.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
"Single-slope garage on ground screws, 7 meters long, 3.50 meters wide, 2.70 meters high. Garage door at the front, entry door at the back. Slope from right to left, with the right side height at 2.70m."
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 7000 mm | 1000 – 20000 |
| Overall Width | 3500 mm | 1000 – 10000 |
| Right Wall Height | 2700 mm | 500 – 8000 |
| Left Wall Height | 2200 mm | 500 – 8000 |
| Wall Thickness | 150 mm | 50 – 500 |
| Floor Thickness | 200 mm | 100 – 600 |
| Roof Thickness | 150 mm | 50 – 500 |
| Garage Door Width | 3000 mm | 500 – 5000 |
| Garage Door Height | 2500 mm | 500 – 5000 |
| Entry Door Width | 900 mm | 500 – 3000 |
| Entry Door Height | 2100 mm | 500 – 5000 |
| Door Panel Thickness | 50 mm | 20 – 200 |
| Ground Screw Diameter | 200 mm | 50 – 800 |
| Ground Screw Length | 1000 mm | 200 – 5000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.