Mechanical parts
Single Shaft Bottle Shredder
- Bounding box
- 253.5 × 160 × 229.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 31
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design of an automated single shaft plastic bottle shredder
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate width | 240 mm | 150 – 340 |
| Base plate depth | 160 mm | 100 – 260 |
| Base plate thickness | 10 mm | 6 – 20 |
| Upright thickness | 12 mm | 8 – 24 |
| Upright depth | 110 mm | 60 – 160 |
| Upright centre offset | 70 mm | 40 – 140 |
| Chamber floor height | 80 mm | 40 – 180 |
| Chamber height | 80 mm | 50 – 150 |
| Chamber half depth | 40 mm | 25 – 70 |
| Chamber wall thickness | 5 mm | 3 – 10 |
| Discharge screen thickness | 5 mm | 3 – 10 |
| Rotor axis height | 120 mm | 60 – 280 |
| Shaft diameter | 12 mm | 8 – 26 |
| Shaft length | 176 mm | 120 – 300 |
| Blade tip radius | 32 mm | 18 – 60 |
| Blade disc thickness | 10 mm | 5 – 20 |
| Number of blade rows | 4 mm | 1 – 8 |
| Blade row spacing | 28 mm | 14 – 60 |
| Tooth relief diameter | 30 mm | 14 – 50 |
| Hopper height | 70 mm | 30 – 140 |
| Hopper bottom width | 130 mm | 70 – 240 |
| Hopper bottom depth | 90 mm | 60 – 180 |
| Hopper top width | 170 mm | 80 – 280 |
| Hopper top depth | 125 mm | 70 – 220 |
| Hopper wall thickness | 4 mm | 2 – 8 |
| Bin width | 120 mm | 70 – 200 |
| Bin depth | 100 mm | 60 – 170 |
| Bin height | 60 mm | 30 – 120 |
| Bin wall thickness | 4 mm | 2 – 8 |
| Motor body diameter | 54 mm | 30 – 100 |
| Motor body length | 58 mm | 30 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.