Mechanical parts
Shower Arm Extension G1/2 (no hex)
- Bounding box
- 27.0 × 27.0 × 169 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
remove the hex nut
Parameters
| Name | Value | Range |
|---|---|---|
| Extension length | 150 mm | 60 – 250 |
| Tube outer diameter | 22 mm | 16 – 32 |
| Tube wall thickness | 3 mm | 2 – 6 |
| G1/2 major diameter | 20.96 mm | 20.5 – 21.5 |
| G1/2 thread pitch | 1.81 mm | 1.2 – 2.2 |
| Thread length | 12 mm | 8 – 22 |
| Wall thickness around the female thread | 3 mm | 2 – 8 |
| Collar height above the bed | 13 mm | 8 – 30 |
| Hole diameter | 2 mm | 1 – 5 |
| Hole centre below the outlet shoulder | 10 mm | 3 – 40 |
| Tilt backwards from radial | 30 deg | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.