Brackets and mounts
Shelf Extension Wing Bracket
- Bounding box
- 243.8 × 254 × 137.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a solid shelf extension wing bracket. The base 2D profile represents the front view and must be extruded into a 3D solid with a total depth of 10.0 inches. Every section of the model must have a uniform material thickness of 0.6 inches. The front profile consists of the following connected features: - A C-channel (a sideways U-shape) that wraps around the side edge of the existing shelf. The C-channel has an inner gap height of 0.6 inches. - The top arm of the C-channel extends horizontally 1.5 inches inward to the left (to rest on top of the shelf). - The bottom arm of the C-channel extends horizontally 3.0 inches inward to the left (to brace beneath the shelf). - A 3.0-inch vertical segment dropping straight down, aligned perfectly with the right-most (outer) back wall of the C-channel. - A 6.0-inch horizontal platform extending outward to the right (opposite the C-channel arms) from the bottom of the 3.0-inch vertical drop.
Parameters
| Name | Value | Range |
|---|---|---|
| Material thickness | 15.24 mm | 5 – 30 |
| C-channel inner gap | 15.24 mm | 5 – 30 |
| Top arm reach | 38.1 mm | 10 – 100 |
| Bottom arm reach | 76.2 mm | 10 – 150 |
| Vertical drop | 76.2 mm | 10 – 150 |
| Platform reach | 152.4 mm | 20 – 300 |
| Depth | 254 mm | 50 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and