Mechanical parts
Shaft with Two Split Clamps and Flat Bar (Trimmed Ends)
- Bounding box
- 140.0 × 26.0 × 38.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
shorten the shaft 30mm each side
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft Diameter | 20 mm | 5 – 80 |
| Shaft Length (before trim) | 200 mm | 40 – 600 |
| Shorten Each End | 30 mm | 0 – 100 |
| End Chamfer | 1 mm | 0 – 3 |
| Clamp Offset from Centre | 45 mm | 5 – 200 |
| Band Thickness | 3 mm | 1 – 10 |
| Band Width | 12 mm | 4 – 40 |
| Relief Slit Width | 3 mm | 1 – 10 |
| Ear Width | 8 mm | 4 – 20 |
| Ear Length | 14 mm | 6 – 40 |
| Ear Height | 12 mm | 5 – 30 |
| Clamp Bolt Diameter | 5 mm | 2 – 10 |
| Flat Bar Length | 130 mm | 20 – 400 |
| Flat Bar Width | 25 mm | 5 – 100 |
| Flat Bar Thickness | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.