Mechanical parts
Shaft with End Keyway
- Bounding box
- 45.0 × 45.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Shaft (100mm length, 45mm diameter) with a rectangular key on the end, (length 34.16mm, height 9mm, width 14mm) Key-way tolerances: width: -0.023mm. depth: +0.1mm
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft length | 100 mm | 20 – 500 |
| Shaft diameter | 45 mm | 10 – 200 |
| Keyway length | 34.16 mm | 5 – 100 |
| Keyway width (nominal) | 14 mm | 3 – 50 |
| Keyway depth (nominal) | 9 mm | 1 – 22 |
| Width tolerance | -0.02 mm | -0.1 – 0 |
| Depth tolerance | 0.1 mm | 0 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.