Mechanical parts
Shaft Spacer Stack with Reflector
- Bounding box
- 200.0 × 90.0 × 90.1 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- October 2, 2026
Download
Free to download and use. See the terms.
The prompt
◄──────────────────────────────────────────────────────────┐ │ [D4] [D3] [D2] [D1] [Driven] [Reflector]│ │ │ │ │ │ │ │ ┌────┼──────────┼──────────┼──────────┼──────────────┼───────────────┼────┐ │ │(Nut) │ │ │ │ │(Nut) └────┼──────────┼──────────┼──────────┼──────────────┼───────────────┼────┘ │ │ │ │ │ │ Ø 37mm Ø 37mm Ø 37mm Ø 38mm Ø 54mm Ø 90mm │ │ │ │ │ │ ◄──30mm────►◄──30mm────►◄──30mm────►◄────30mm───►◄─────10mm────►
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft Diameter | 20 mm | 8 – 60 |
| Shaft Length | 200 mm | 80 – 500 |
| Threaded End Length | 30 mm | 5 – 100 |
| Thread Pitch | 2.5 mm | 0.5 – 6 |
| Thread Minor Diameter | 17.5 mm | 6 – 55 |
| Nut Across Flats | 30 mm | 10 – 80 |
| Nut Thickness | 10 mm | 3 – 40 |
| Nut Bore | 17 mm | 5 – 55 |
| Spacer Length | 30 mm | 5 – 100 |
| Spacer Bore | 19.8 mm | 5 – 58 |
| D4 Spacer OD | 37 mm | 10 – 120 |
| D3 Spacer OD | 37 mm | 10 – 120 |
| D2 Spacer OD | 37 mm | 10 – 120 |
| D1 Spacer OD | 38 mm | 10 – 120 |
| Driven Gear Module | 2 mm | 0.5 – 6 |
| Driven Gear Teeth | 25 teeth | 8 – 80 |
| Driven Gear Width | 10 mm | 3 – 50 |
| Driven Gear Bore | 19.8 mm | 5 – 58 |
| Reflector Diameter | 90 mm | 20 – 250 |
| Reflector Thickness | 20 mm | 3 – 80 |
| Reflector Bore | 19.8 mm | 5 – 58 |
| Reflector Rim Chamfer | 2 mm | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.